Picking your ideal welding helmet is a lot of hard work.
You want to ensure you are not blowing your budget, but you also want the best quality product to protect you while using it.
Auto Darkening Welding Helmet Review
With tons of mixed reviews out there, we thought we would compile them and do the hard work for you to pick the best among them.
We compiled a list of the best pocket-friendly helmets and in-depth reviews to help you narrow your options and find the best one.
We understand that finding positives in a helmet is almost as valuable as finding the cons, so we have made sure to miss anything on this helmet.
TEKWARE Moto 90
Our top choice for a budget-friendly welding helmet is the TEKWARE Moto 90 supremely developed auto-darkening helmet.
A delicate hemispherical design helps protect you from every side while offering a huge viewing window with very true-color view Lenses.
Four premium arc sensors united with an extremely sensitive probe can emit a signal that rapidly makes the screen darker, 1/10,000s of 2nd.
And with customizing sensitivity and delay controls, this TEKWARE Moto 90 helmet can be set up to your suitable needs.
The showing area starts at shade four in Grind mode and can be adjusted to shade up to thirteen in cut and weld modes.
The TEKWARE Moto 90 helmet is battery-powered and has a solar power cell, which helps prolong the power life and protects the consumers from battery failure.
This lightweight model and its four-way adjustable headgear can be set to the needed head type and comfort levels.
Read Next – Best Welding Helmets Auto Darkening Buying Guide
Moto90 auto-obscuring welding cap with a progressive shell configuration was sent off in Oct 2019 by Tekware think tank. Proficient welders let us know they love the highlights and plan of this protective cap. It is one of the most delightful protective caps at the cost.
I will give a Tekware Moto 90 Auto Darkening Welding Helmet Review in this article. So, here see the Tekware Moto 90 Auto Darkening Welding Helmet Review.
Welding Helmet, Auto Darkening, 1-9/16in.H
Read Next – Best Welding Helmets Under $100 – Our Buying Guide (2022 Edition)
Tekware Moto 90 Auto Darkening Welding Helmet Overview:
The choice of a welding helmet should be approached responsibly. Even if it is rarely used, you should not save on your vision. The insidiousness of a retinal burn is that it cannot be noticed immediately: a seemingly little missed flash will make itself felt only after a few hours of pain in the eyes.
But a quality mask is not only about safety. By choosing the correct light transmission; you can get the best view of the welding zone and, therefore, the best possible control of its progress.
Suppose you are looking for an excellent inexpensive welding mask and are willing to sacrifice the size of the visor but want adjustments to be accessible from the outside. In that case, you should pay attention to the Tekware Moto. Yes, the 3.94” x 3.27” visor is not so big, but it works out clearly, and absolutely all controls are available without removing the mask.
Under the left hand is a dimming regulator (9-13 DIN) and an auto-dimming off slider. Under the right hand are a sensitivity regulator and a three-position delay time selector.
The mask’s weight is just over half a kilogram; it is comfortable for long-term wear. Of course, her headband is rustic. The cover is generally worth its money.
The peculiarity of the Tekware Moto 90 Auto Darkening Welding Helmet Review lies in the light filters with True color technology, guaranteeing the welding process’s natural color reproduction. Dimming works even at shallow and high temperatures. This model does not have a shutdown in case of overheating so you can work much longer.
This model has an adjustable headband, which is securely fixed on the head. The body is heat-resistant plastic, so the mask weighs just over half a kilogram. It has the most common light filter without any settings.
The size of the reclining window is 3.94” x 3.27”. So, see below the Tekware Moto 90 Auto Darkening Welding Helmet Review.
Read Next – 3M Speedglas 9100 Review
Tekware Moto 90 Auto Darkening Welding Helmet Review:
Tekware Moto 90 Auto Darkening Welding Helmet is a reasonably simple welding helmet with a 3.94” x 3.27” light filter and two sensors, which received an external dimming adjustment in the 9-13 DIN range.
Moreover, the same knob, being turned to the minimum until it stops, switches the mask to the “Season cleaning” mode, allowing you not to mess around with a separate switch.
Two more switches are located inside and are made more ergonomically than on most inexpensive masks: instead of microscopic sliders “under the nail,” relatively large ones are installed here, with protrusions that allow you to keep the leggings on. Sensitivity and pause are available for adjustments – in both cases, the owner has three options for settings. Outside and inside, protective glasses (more precisely, transparent plastic plates) are replaceable.
The battery here, alas (but expected for an inexpensive mask), is non-replaceable, adding its share of inconvenience. After prolonged storage, it may be necessary to “expose” the mask to the sun.
However, at the same time, on the box, it is written in large letters that there is a lithium battery in addition to the solar battery, which can be mistaken for the possibility of a quick change (after all, such batteries are easy to change on professional masks) – pay attention to this.
But in another moment, the manufacturer is commendably honest, not directly recommending his mask for welding: at low currents, it will start blinking, not working out the shading usually. Although, if you have an expensive argon-arc welding machine, will you also buy an inexpensive mask from a purely amateur class for work?
Tekware Ultra Large Viewing Screen True Color Solar Power Auto Darkening Welding Helmet, Hemispherical 4C lense, 4 Arc Sensor Wide Shade 4~5/9-9/13 for TIG MIG Arc Weld Grinding Welder Mask
Read Next – Best Welding Helmets Under $200
Pros:
- Adjustments are fully accessible without removing the mask
- Good filter quality
- External dimming adjustment and switch to stripping mode
- Overall a good job
- Large viewing window
- Protection against splashes of hot metal
- Replaceable light filter
- Powered by solar and lithium replaceable batteries
- Smooth adjustment of shading from 9 to 13 DIN
- Minimum protection response time
- Change in sensitivity depending on the type of welding
- Dimming delay setting;
- Two independent arc/glow sensors.
Cons:
- Small sliders are challenging to switch in leggings
- Non-replaceable battery
- Fragile plastic headband and its attachments
- This most straightforward modification is suitable for short-term and one-time welding work. Of course, it is not ideal for professional use.
- The light filter may not work if the angle of incidence relative to the arc is more than 120°.
- This is a certified product for which the manufacturer gives a three-year warranty.
Verdict:
In terms of price, Wester goes toe-to-toe with the Tekware Moto 90 Auto Darkening Welding Helmet but beats him only in mass (almost 20 percent less).
But the visor itself is smaller here, 3.94” x 3.27”, and the dimming range is limited from above not to 13 DIN, as usual, but only to 11 DIN.
There is only one external regulator – it sets the degree of dimming and turns off the automation in the extreme position. Inside the panel are smooth controls for sensitivity and delay of enlightenment.
As a result, we admit that the Wester welding mask clearly cannot compete with the Tekware Moto 90 Auto Darkening Welding Helmet since the sheer quality of the light filter they have is “plus or minus” the same. Still, the Tekware Moto 90 Auto Darkening Welding Helmet is more convenient to work with.
TEKWARE Large Viewing True Color Solar Powered Auto Darkening Welding Helmet, Hemispherical 4C lense, 4 Arc Sensor Wide Shade Range 4/5-9/9-13 Welder Mask for Mig Tig Arc Grinding Plasma, Black
Top Welding Helmets Update
Read Next – Best Welding Helmets Review And Buying Guide
Tekware Large Viewing Screen Welding Helmet Auto Darkening, Luminous True Color Welding Hood Solar Powered, Hemispherical 4C Lens, 4 Arc Sensor Variable Shade 4~5/9-9/13 for TIG MIG Arc Welders Mask
Tekware Ultra Large Viewing Screen True Color Solar Power Auto Darkening Welding Helmet, Hemispherical 4C lense, 4 Arc Sensor Wide Shade 4~5/9-9/13 for TIG MIG Arc Weld Grinding Welder Mask
Welding Helmet, Auto Darkening, 1-9/16in.H
ESAB 0700000800 Sentinel A50 Welding Helmet, Black, 3.93 x 2.36 in. (100 x 60 mm) Viewing Area.
YESWELDER True Color Solar Powered Auto Darkening Welding Helmet, Wide Shade 4/9-13 for TIG MIG ARC Weld Hood Helmet
Tekware Auto Darkening Welding Helmet with Ultra Large Viewing Screen, True Color Welding Hood, 4 Arc Sensor Welder Helmet, Lightweight Welding Mask for TIG MIG ARC Grinding,1/1/1/2 Optical Clarity
TEKWARE Large Viewing True Color Solar Powered Auto Darkening Welding Helmet, Hemispherical 4C lense, 4 Arc Sensor Wide Shade Range 4/5-9/9-13 Welder Mask for Mig Tig Arc Grinding Plasma, Black
Q: What is the TEKWARE Moto 90 Auto Darkening Welding Helmet?
A: The TEKWARE Moto 90 Auto Darkening Welding Helmet is a welding hood or mask that protects the eyes and face during welding, powered with solar panel technology that switches from light to dark within milliseconds upon exposure to harmful welding arcs.
Q: What are the features of the TEKWARE welding helmet?
A: The TEKWARE welding helmet boasts an ultra-large viewing area and differences in angles, hemispherical 4C lens technology, and accurate color view, and is powered by a large area of solar cells, protecting the eyes during welding.
Q: How does the auto-darkening feature of the TEKWARE welding helmet work?
A: The TEKWARE welding helmet has an auto-darkening feature that switches from light to dark within milliseconds upon exposure to harmful welding arcs, protecting the eyes from burns and high infrared and ultraviolet rays.
Q: What is the rating of the TEKWARE Moto 90 Auto Darkening Welding Helmet?
A: The TEKWARE Moto 90 Auto Darkening Welding Helmet has a rating of 1/1/1/1 for optical clarity, diffusion of light, angular dependence, and consistency.
Q: How much battery is used by the TEKWARE welding helmet?
A: The TEKWARE welding helmet uses a single battery CR2450 to power the auto-darkening feature of the welding helmet.
Q: How is the TEKWARE welding helmet powered?
A: The TEKWARE welding helmet is powered by solar panel technology, which charges the battery powering the auto-darkening feature.
Q: How is TEKWARE ultra-large viewing different from other welding hoods or masks?
A: The TEKWARE ultra-large viewing is a large viewing area and differences in angles made possible by the hemispherical 4C lens technology and powered by a large area of solar cells that provides a clear and accurate color view.
Q: What is the difference between actual color solar and harmful welding arcs?
A: True color solar is a welding helmet feature that provides a clear and true color view while welding, whereas welding arcs emit high infrared and ultraviolet rays that can harm the eyes and skin.
Q: Can the TEKWARE welding helmet be used for TIG, MIG, and Arc welding?
A: Yes, the TEKWARE welding helmet is suitable for TIG, MIG, and Arc welding, with an auto-darkening feature that switches from light to dark in milliseconds upon exposure to a welding arc.
Q: Where can I buy a TEKWARE Moto 90 Auto Darkening Welding Helmet?
A: The TEKWARE Moto 90 Auto Darkening Welding Helmet is available on the official TEKWARE website and other online marketplaces such as Amazon, eBay, and Walmart.
