TEKWARE Moto 90 Auto Darkening Welding Helmet Review

Picking your ideal welding helmet is a lot of hard work.

You want to ensure you are not blowing your budget, but you also want the best quality product to protect you while you are using it.

Auto Darkening Welding Helmet Review

With tons of mixed reviews out there, we thought we would compile them and do the hard work for you to pick the best among them.

We put together a list that features the best pocket-friendly helmets and in-depth reviews that’ll help you narrow down your options and find the best one for you.

We understand that finding positives in a helmet is almost as valuable as finding the cons, so we have made sure to miss anything on this helmet.

TEKWARE Moto 90

Our top choice for a budget-friendly welding helmet is that TEKWARE Moto 90 supremely developed auto-darkening helmet.

A delicate hemispherical design helps protect you from every side while still offering a huge viewing window with very true-color view Lenses.

Four premium arc sensors united with an extremely sensitive probe can emit a signal that rapidly makes the screen darker, 1/10,000s of 2^nd.

And with customizing sensitivity and delay controls, this TEKWARE Moto 90 helmet can be set up to your suitable needs.

The showing area starts at a shade four in Grind mode and can be adjusted to shade up to thirteen in cut and weld modes.

The TEKWARE Moto 90 helmet is battery-powered and has a solar power cell, which helps prolong the life of power and protects the consumers from battery failure.

This lightweight model, along with its four-way adjustable headgear, has the flexibility to be set to the needed head type and comfort levels.

Read Next – Best Welding Helmets Auto Darkening Buying Guide

 

Moto90 auto-obscuring welding cap with a progressive shell configuration was sent off in Oct 2019 by Tekware think tank. Proficient welders let us know they love the highlights and plan of this protective cap. It is one of the most delightful protective caps at the cost.

In this article, I will give a Tekware Moto 90 Auto Darkening Welding Helmet Review. So, here see the Tekware Moto 90 Auto Darkening Welding Helmet Review.

Read Next – Best Welding Helmets Under $100 – Our Buying Guide (2022 Edition)

Tekware Moto 90 Auto Darkening Welding Helmet Overview:

The choice of a welding helmet should be approached responsibly. Even if it is rarely used, you should not save on your vision. The insidiousness of a retinal burn is that it cannot be noticed immediately: a seemingly little missed flash will make itself felt only after a few hours of pain in the eyes.

But a quality mask is not only about safety. By choosing the correct light transmission, you can get the best view of the welding zone, and therefore the best possible control of its progress.

Suppose you are looking for an excellent inexpensive welding mask and are willing to sacrifice the size of the visor, but want adjustments to be accessible from the outside. In that case, you should pay attention to the Tekware Moto. Yes, the 3.94” x 3.27” visor is not so big, but it works out clearly, but absolutely all controls are available without removing the mask.

Under the left hand is a dimming regulator (9-13 DIN) and an auto-dimming off slider, under the right hand, is a sensitivity regulator and a three-position delay time selector.

The mask’s weight is just over half a kilogram, it is comfortable for long-term wear. Of course, her headband is rustic. The cover is generally worth its money.

The peculiarity of the Tekware Moto 90 Auto Darkening Welding Helmet Review lies in the light filters with True color technology, which guarantee the natural color reproduction of the welding process. Dimming works even at shallow and high temperatures. This model does not have a shutdown in case of overheating, so you can work much longer.

This model has an adjustable headband, which is securely fixed on the head. The body is made of heat-resistant plastic, thanks to which the mask weighs just over half a kilogram. It has the most common light filter without any settings.

The size of the reclining window is 3.94” x 3.27”. So, see below the Tekware Moto 90 Auto Darkening Welding Helmet Review.

Read Next – 3M Speedglas 9100 Review

Tekware Moto 90 Auto Darkening Welding Helmet Review:

Tekware Moto 90 Auto Darkening Welding Helmet is a fairly simple welding helmet with a 3.94” x 3.27” light filter and two sensors, which received an external dimming adjustment in the range of 9-13 DIN.

Moreover, the same knob, being turned to the minimum until it stops, switches the mask to the “Season cleaning” mode, allowing you not to mess around with a separate switch.

Two more switches are located inside, and are made more ergonomically than on most inexpensive masks: instead of microscopic sliders “under the nail”, quite large ones are already installed here, with protrusions that allow you to keep the leggings on. Sensitivity and pause are available for adjustments – in both cases, the owner has three options for settings. Outside and inside, protective glasses (more precisely, transparent plastic plates) are replaceable.

The battery here, alas (but expected for an inexpensive mask) is non-replaceable, adding its share of inconvenience. After prolonged storage, it may be necessary to “expose” the mask to the sun.

However, at the same time, on the box, it is written in large letters that there is a lithium battery in addition to the solar battery, which can be mistaken for the possibility of a quick change (after all, such batteries are easy to change on professional masks) – pay attention to this.

But in another moment, the manufacturer is commendably honest, not directly recommending his mask for welding: at low currents, it will start blinking, not working out the shading usually. Although, if you have an expensive argon-arc welding machine, will you at the same time buy an inexpensive mask from a purely amateur class for work?

Read Next – Best Welding Helmets Under $200

Pros:

• Adjustments are fully accessible without removing the mask
• Good filter quality
• External dimming adjustment and switch to stripping mode
• Overall a good job
• Large viewing window
• Protection against splashes of hot metal
• Replaceable light filter
• Powered by solar and lithium replaceable batteries
• Smooth adjustment of shading from 9 to 13 DIN
• Minimum protection response time
• Change in sensitivity depending on the type of welding
• Dimming delay setting;
• Two independent arc/glow sensors.

Cons:

• Small sliders are difficult to switch in leggings
• Non-replaceable battery
• Fragile plastic headband and its attachments
• This most straightforward modification is suitable for short-term and one-time welding work. Of course, it is not ideal for professional use.
• The light filter may not work if the angle of incidence relative to the arc is more than 120°.
• This is a certified product for which the manufacturer gives a three-year warranty.

Verdict:

In terms of price, Wester goes toe-to-toe with the Tekware Moto 90 Auto Darkening Welding Helmet but beats him only in mass (almost 20 percent less).

But the visor itself is smaller here 3.94” x 3.27”, and the dimming range is limited from above not to 13 DIN, as usual, but only to 11 DIN.

There is only one external regulator – it sets the degree of dimming and turns off the automation in the extreme position. Inside the panel are smooth controls for sensitivity and delay of enlightenment.

As a result, we admit that the Wester welding mask clearly cannot compete with the Tekware Moto 90 Auto Darkening Welding Helmet, since the very quality of the light filter they have is “plus or minus” the same, but the Tekware Moto 90 Auto Darkening Welding Helmet is more convenient to work with.

Top Welding Helmets Update

Read Next – Best Welding Helmets 2022 – Review And Buying Guide